| TECHNICAL SPECIFICATIONS Free vibrating screen is produced with highest sensivity and attention due to its importance in the process. The amplitude of the screen body is adjusted to 7 mm. at the manufactory in order to gain a maximum of capacity. The screening capacity of the screen is strongly related to the gradation , humidity rate of the material and moisture the material with washer or not. The screen and its bunkers are completely fixed and they are attached to a chasis which can be demounted with bolts. There are platforms to walk on for maintenance of the screen and replacement of the screen wires. SCREEN BODY: The side plates of the screen is made of one-piece steel sheet and screen grids are attached to side body with secure bolts. The spiral spring and rubber wedge are used so that body vibration do not pass to the chasis. The steel wire corded screen wires that put on grids in the body are tightened from the sides. VIBRATION: Two sides of eccentric shaft are fixed from countered weights. The bearing of shaft is hard type and equipped with two spherical roller bearing. The amplitude of the vibration can be changed 4-8 mm. with changing the amount of weight and the turn of the shaft. The connection between vibrator bearing body and the screen body are built with a maximum sensivity.
      |
       |
